JPSS Jersey Cam, Header and Exhaust Package
We met online. Camaro5.com. We chatted online. Then by phone. The more we talked, it was clear Fred deserved something special. We blended a great driving cam with headers, high flow cats and exhaust. The result was so good we decided to create a JPSS package named Jersey.
The new BlackHeart Headers are great, but they do not offer a catted option. New Jersey requires cats so we had to get creative. The ARH catted mid-pipes flow great and come close to mating with the ultra-high flow, low back pressure ear splitting Borla Atak. With a few hours of custom fabrication the Hooker- ARH-Borla custom exhaust fit perfectly. Thermal management is always top of mind so we hand wrap headers with DEI Titanium wrap and secure it with safety wire. It takes hours, but the lower under hood temperatures are worth it. We take the time to remove the sound insulation that covers the plenum and holds heat in. Attention to detail is our hallmark.
Your OE valve springs are replaced with higher rate dual springs from COMP. The OE rockers and pushrods are good to go. The cam requires a three bolt sprocket and we use a GM LS7 upper large sprocket. Fresh Prestone DexCool replaces coolant lost during the cam change. A Mobil 1 oil change with a NAPA Gold filter is standard operating procedure. Your Camaro will be tuned in Concord NC on a NASCAR dyno at a NASCAR Engine Shop. We drive from Martinsville, VA to Concord, NC as part of the build validation process. After tuning is complete, we drive back. We use this time to road test drivability, check for leaks, data log and verify there are no Check Engine Lights. Your JPSS Jersey Package Camaro it is ROAD TESTED, good to go on delivery.
Your JPSS Jersey setup sounds viscous, loud and nasty. Hit the play button on the videos. There is no drone with the cruise control engaged. This setup is not subtle. Jersey doesn’t do subtle. Hit the accelerator and your LS3 Camaro screams. On the dyno the all-day everyday day numbers we achieved on a 95 degree day are 440 RWHP and 409 RWTQ with a conservative safe pump gas tune. It pulls down low and pulls through 6500 RPMs. Some would say we left power on the table. We could lean it out. We could add timing. We say we delivered all-day, every day consistent reliable power. The JPSS Jersey Package is a Driver’s Dream.
JPSS is committed to delivering the highest levels of service, quality and reliability. It is what our clients deserve. Call JPSS to make your Camaro dream come true. Call us to discuss your dream build (276) 644-0100
Valet Shipping Service is Available
COMP CAM Custom Grind - It has the lope. It delivers great performance across the power band. This is a driver’s cam, not a dyno queen glory number.
224 / 234 @ .050, .581/.576 w/ 1.7 rocker, 114 lobe sep 110 int c/l
COMP Cams High Performance Valve Spring Kit - This high performance valve dual spring kit from COMP Cams comes complete with all new hardware.
Outside Diameter of Outer Spring (in): 1.320 in. , Spring Rate (lbs/in): 400 lbs./in., Inside Diameter of Outer Spring (in): 0.958 in., Inside Diameter of Inner Spring (in): 0.680 in., Retainers Included: Yes, Retainer Material: Tool steel, Locks Included: Yes, Lock Material: Steel
Hooker BlackHeart Headers - These Hooker Blackheart headers are constructed of lightweight 18-gauge, 304 stainless steel with high-flow, long-transition collectors featuring merge spears for maximum flow and increased exhaust velocity. They feature 3/8 in. thick laser-cut flanges that provide a maximum sealing surface for a leak-free seal and ultimate strength. The primary tubes are designed for optimum flow and maximum ground and engine component clearance, providing the perfect combination of performance and fit. When it's time to tear the heart out of the competition, choose Blackheart!
Borla Atak Cat Back -Mount an offensive to regain optimum acoustics with Borla ATAK cat-back systems. Your Camaro will not only be performance-enhanced, but also acoustically tuned to a loud, aggressive exhaust note, making those of you who prefer the sound of your exhaust over your stereo very happy! ATAK (Acoustically Tuned Applied Kinetics) technology produces the highest dB levels, avoiding distortion to retain clarity. Tuned like a graphic equalizer, these cat-back systems are custom-tuned for your specific vehicle, delivering the most desirable sound to your ears. Plus, you retain all of the power-adding capabilities of Borla's multi-core design. This system is handmade in the USA by master craftspeople from premium 300-Series high-quality austenitic stainless steel and ultra-smooth, mandrel-bent piping. Bolt on the finest craftsmanship, unmatched performance, and intoxicating sound with Borla ATAK cat-back systems.
Call us to learn more (276) 644-0100